 |
 |
 |
|
Try our new rotational molded double wave slide for light commercial and residential use.
- **Installation, Safe Use and Maintenance Instructions**
- IMPORTANT: To keep children safe from harm, follow these precautions and instructions when installing, using, or maintaining this playground equipment. You can also call us at 1-800-227-7529 for more information or see http://www.cpsc.gov/cpscpub/pubs/324.pdf or http://www.cpsc.gov/cpscpub/pubs/325.pdf. Due to the thermo dynamics and lower heat transfer properties of plastics, plastic slides are preferred over metal slides for play equipment. Although plastic slides may become as hot as metal, they insulate better and don’t transfer the heat as quickly. Because of these properties, the Consumer Product Safety Commission (CPSC) recommends plastic slides and plastic surfaces over bare metal.
- Regardless of lower heat transfer properties, plastic play equipment can still become hot enough ‐‐ in extreme temperatures and direct sunlight ‐‐ to cause burns. Plastic slides are safe, tried and true, but as is the case with all playground equipment, parents and supervisors must monitor the children in their care, make certain that the equipment is appropriate for their age, and always check playground surfaces for excessive heat before allowing children to play. For more information, contact IPEMA headquarters at www.communications@ipema.org or by calling 1‐717‐238‐1744.
- Installation: There are 2 indentations at the top of the slide to drill in either 2 Truss head wood screws or pan head wood screws. The bottom needs to be on a flat surface preferably one that will not let the end sink in the ground.
- Safe Use: This is for children 5-12 year olds only. Not for Adults. Adults should supervise children at all times. Do not allow children to stand on or use unsafely. Do not allow it to be used if damaged.
- Maintenance: Do the following to reduce the chance of serious injuries. Check monthly for cracks, rust, missing rivets, open S-hooks or evidence of vandalism such as cutting, metal showing through the material or bent seats from children standing on them. Tighten and lubricate all metallic moving parts per manufacturer’s instructions. Check all protective coverings on nuts, bolts, pipes, edges, corners and all moving parts including swing hangers, swing seats, ropes, cables, chains and shackles. Replace as needed. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around playground equipment. In high use areas these inspections should be done more frequently. Clean with mild soap and water when you do the monthly maintenance checks.
- Any damage from vandalism, abuse or misuse VOIDS all warranties.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- We have made the wave less pronounced so that the slide is not so fast
- for small children. It is more flexible to withstand the weather and
- freight companies.
There is a stake hole in the bottom of the slide so that it can be staked to the ground to avoid being picked up.
The sides are also scalloped.
The - 10 ft slide fits a 5 ft platform. Top lip is 17 ½” wide, seat is 13”
- wide, sides are 4 ½” deep. Bottom is 19 ¼” wide and the base is 10” from
- floor to seat.
Colors: Blue, Green Red, and Yellow
|
|
|
|
|
|
|